Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 39)

Adjustment Using the Menus
39
[Format]
[Screen Aspect]
[Matrix/Color Profile]
[Copy From] Copies signal setting data from other
channel.
For details of the setting, see [Copy From]
(page 45).
Note
Use the controller of BKM-16R with
software version 1.6 or higher or BKM-
17R to use the [Copy From] function.
Submenu Setting
[3G/HD/SD-SDI] Sets the serial digital signal format
(Single-link 3G-SDI, HD-SDI or SD-
SDI).
 [3G/HD/SD-SDI Auto]: Changes
the format automatically according
to the Sampling Structure, Bit
Depth, Picture and transport
scanning method information for
Payload ID of SMPTE-352M
standard superimposed on the input
signals.
Note
You can confirm the Payload ID
information and the signal format
status of the current monitor in [SDI
Payload ID Status] (page 70) of the
[System Status] menu or using the
STATUS button on the controller.
For details on the display using the
STATUS button, see “Displaying the
Monitor Status Page” (page 75).
 [3G-SDI]: Sets the signal format.
Select from [4:2:2 YCbCr 10bit],
[4:4:4 YCbCr 10bit], [4:4:4 RGB
10bit], [4:4:4 YCbCr 12bit], [4:4:4
RGB 12bit], [4:4:4 XYZ 12bit].
 [HD/SD-SDI Auto]: Changes the
format automatically according to
the format of the input signal.
 [SD-SDI]
[Dual Link HD-SDI] Sets the Dual-link HD-SDI signal
format.
 [4:2:2 YCbCr 10bit]
 [4:4:4 YCbCr 10bit]
 [4:4:4 RGB 10bit]
 [4:4:4 YCbCr 12bit]
 [4:4:4 RGB 12bit]
 [4:4:4 XYZ 12bit]
Submenu Setting
[Composite] Sets the composite signal format.
 [Auto]: Changes automatically
according to the format of the input
signal.
It will take a few seconds to detect
the format of an input signal. It is
recommended that a particular
format be selected if it is determined.
 [NTSC]
 [PAL]
 [PAL-M]
[HDMI] Sets the HDMI signal format.
In this manual, the 800 Ч 600, 1024 Ч
768, 1280 Ч 960, 1280 Ч 1024, and 1400
× 1050 signals are referred to as the
HDMI computer signals.
For the signal format to be displayed, see
page 93.
Submenu Setting
[HD] Sets the aspect ratio of the HD signal.
 [16:9]
 [2.39:1]
[SD] Sets the aspect ratio of the SD signal.
 [16:9]
 [4:3]
[DC 2048×1080] Sets the aspect ratio of the digital
cinema signal (2048 × 1080).
 [1.896:1]
 [2.39:1]
[HDMI Auto] Sets the manual or automatic setting for
the aspect ratio of the HDMI signal.
 [Off]: Select to set the aspect ratio
manually with the controller, etc.
 [On]: Select to set the aspect ratio
automatically according to the input
signal. The aspect ratio is not set
with the controller, etc.
Submenu Setting
[Matrix] Sets Matrix data (transmission matrix)
depending on the input signal format.
Four transmission matrix data are
preset and can be selected for the HD or
SD input signal respectively.
For the type of the input signal, see
“Available Signal Formats” (page 89).
Submenu Setting