Connecting the hdmi cable, Connecting the power cord, To connect the ac power cord – Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters User Manual
Page 19

19
Connecting the HDMI cable / Connecting the Power Cord
Connecting the HDMI
cable
1
Remove the two screws on both sides of the HDMI
IN connector.
2
Attach the HDMI cable holder (supplied) with the
removed screws.
3
Insert the HDMI cable and fix with a commercially-
available cable fixer (1 piece).
Connecting the Power
Cord
You can operate the monitor with AC or DC power
supply.
To connect the AC power cord
1
Plug the AC power cord into the AC IN connector
on the rear panel then attach the AC plug holder
(supplied) to the AC power cord.
2
Slide the AC plug holder over the cord until it locks.
To remove the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
To connect the DC power supply
Connect the DC power supply to the DC IN 24V - 28V
connector.
When the AC power cord and DC power supply are
connected, the AC power supply is given preference over
the DC power supply. To use the DC power supply,
disconnect the AC power cord.
HDMI cable holder (supplied)
Cable fixer
HDMI cable
AC IN connector
AC power cord (supplied)
AC plug holder
(supplied)