Connecting to a network – Sony ZV-1F Vlogging Camera (Black) User Manual

Page 57

can be used simultaneously by connecting
modems to both connectors.

Notes

• When using a modem connected to a dedicated hub, a

modem connected to the USB 3.0 (HOST) connector
cannot be used.

• Attach/remove the modem while the camcorder is

turned off.

Connecting a modem to a dedicated USB hub
(CBK-DL1) connected to the USB 2.0 (HOST)
connector

One or two modems can be connected to a
dedicated USB hub connected to the USB 2.0
(HOST) connector.

Notes

• Attach/remove the modem and dedicated USB hub

while the camcorder is turned off.

• When a dedicated hub is connected, a modem

connected to the USB 3.0 (HOST) connector cannot be
used.

Connecting to a network

Turn the camcorder on.

Set Modem >Setting in the Network
menu to On.

Note

• It may take some time (about 1 minute) to connect to a

3G/4G network. Wait until the network status indicator

“modem” icon shows a strength of 1 or

higher on the LCD/viewfinder screen.

You can connect the camcorder to the Internet in
Wi-Fi station mode via an optional wireless LAN
router or by tethering to a device.

Connect to the wireless LAN router or device as
described in

You can connect with a device by connecting the
wired LAN connector of the camcorder to an
Internet router using a LAN cable.

Connecting using wireless LAN
station mode

Connecting using a LAN cable

Smartphone/
tablet

Wireless LAN router

Computer

Internet

Smartphone/
tablet