Sony ZV-1F Vlogging Camera (Black) - Manual (Page 109)

109
AP Mode
Settings
Access point mode
connection settings
Channel
Auto(5GHz) / Auto / CH1 /
CH2 / CH3 / CH4 / CH5 / CH6
/ CH7 / CH8 / CH9 / CH10 /
CH11
Sets the wireless LAN channel.
Auto(5GHz) is available on the PXW-Z190V only.
Camera SSID & Password Displays the SSID and password of the camcorder.
Regenerate Password
Execute / Cancel
Creates a new password.
Execute: Execute function.
IP Address Displays the IP address of the camcorder in access point
mode.
Subnet Mask Displays the subnet mask of the camcorder in access point
mode.
ST Mode
Settings
Station mode
connection settings
Camera Remote Control
Enable / Disable
Sets whether to enable remote control from a device
connected to the camcorder by wireless LAN in station mode.
Connected Network Displays the connected wireless LAN network (access point).
SSID Displays the SSID for the access point to connect.
Security Displays the type of security for the access point to connect.
Password Displays the password for the access point to connect.
When Security is set to WEP or WPA: *******
When Security is set to None: *******
DHCP Displays whether DHCP is on/off.
IP Address Displays the IP address of the camcorder when DHCP is set to
Off.
Subnet Mask Displays the subnet mask of the camcorder when DHCP is set
to Off.
Gateway Displays the default gateway of the camcorder when DHCP is
set to Off.
DNS Auto Displays whether DNS acquisition is on/off.
Primary DNS Server Displays the primary DNS server of the camcorder when DNS
Auto is set to Off.
Secondary DNS Server Displays the secondary DNS server of the camcorder when
DNS Auto is set to Off.
Scan Networks Detects wireless LAN networks (access points) and displays a
list.
Select a destination from the list to connect.
SSID Displays the SSID for the access point to connect.
Security Displays the type of security for the access point to connect.
Password Enter the password for the access point to connect.
DHCP
On / Off
Turns DHCP on/off.
IP Address Enter the IP address of the camcorder when DHCP is set to
Off.
Subnet Mask Enter the subnet mask of the camcorder when DHCP is set to
Off.
Gateway Enter the default gateway of the camcorder when DHCP is set
to Off.
Network
Item Sub-items and Settings Description