Sony ZV-1F Vlogging Camera (Black) User Manual
Page 53
53
camcorder and device connect via the access
point.
The 10 most recently connected access points are
displayed in the history.
The connection history is saved in an ALL file,
but the access passwords are not saved. Password
entry is required the next time you connect after
loading the ALL file.
Connecting to an access point using WPS
If the access point is compatible with the WPS
function, you can connect to the access point with
simple settings.
1
Turn the access point on.
2
Turn the camcorder on.
3
Select Wireless LAN >Setting > Station
Mode in the Network menu.
4
Select Wireless LAN >WPS >Execute in
the Network menu.
5
Press the WPS button of the access
point.
For details about the operation of the WPS
button, refer to the operating instructions of
the access point.
When the connection is successful, the
network status indicator icon will show a
strength of 1 or higher on the LCD/
viewfinder screen.
Note
• If the connection fails, perform steps from step 1 again.
6
Connect the device to the access point.
For details about connecting, refer to the
operating instructions of the device.
7
Display the web remote control
. Or connect using the Content
Browser Mobile application.
Connecting to an access point using auto
network detection or manually
You can configure connection to a desired access
point from the setup menu.
You can configure connection to a desired access
point using the auto network detection function.
Connecting using the network auto detection
function
1
Perform steps 1 to 3 in
an access point using WPS” (page 53)
2
Select ST Mode Settings >Scan
Networks
>Execute in the
Network menu.
The camcorder starts detection of connection
destinations.
Detected destinations for connection are
displayed in the Scan Networks result list.
3
Select a connection using the
V
/
v
/
B
/
b
button or SEL/SET dial, and press the
SET button or SEL/SET dial.
Momentarily, the network (access point)
details screen appears. The selected
connection is displayed in SSID.
4
Select Password, and set the password
on the password input screen.
Selecting an SSID in the connection history
automatically configures settings, including
the password.
Set the password to return to the network
(access point) details screen.
Smartphone/
tablet
Access
point
Computer