Sony ZV-1F Vlogging Camera (Black) User Manual

Page 54

Configure the following connection
settings.

• DHCP

Set the DHCP setting.
When you set to On, the IP address is
assigned to the camcorder automatically.
To assign the IP address to the camcorder
manually, set to Off.

• IP Address

Input the IP address of the camcorder. This
setting is available only when DHCP is set
to Off.

• Subnet Mask

Input the subnet mask of the camcorder.
This setting is available only when DHCP
is set to Off.

• Gateway

Input the default gateway for the access
point.
This setting is available only when DHCP
is set to Off.

• DNS Auto

Set to acquire DNS automatically.
When set to On, the DNS server address is
automatically acquired. This setting is
available only when DHCP is set to On.

• Primary DNS Server

Input the primary DNS server for the
access point.
This setting is available only when DNS
Auto is set to Off.

• Secondary DNS Server

Input the secondary DNS server for the
access point.
This setting is available only when DNS
Auto is set to Off.

When finished, select Connect to
connect to the access point.

Connecting manually

Perform steps 1 to 3 in

“Connecting to

an access point using WPS” (page 53)

Select ST Mode Settings >Manual
Register

(page 110)

>Execute in the

Network menu.

Momentarily, the network (access point)
details screen appears.

Configure the following connection
settings.

• SSID

Input the SSID for the connection access
point.

• Security

Select the encryption method.

• Password

Input the password for the connection
access point.