Roland F701 88-Key Modern Digital Piano with Stand and Bench (White) - Manual (Page 14)

14
Practicing/Recording
Practicing with the Metronome
Recording Your Keyboard Performance
Here’s how to perform along with the metronome. You can also change
the metronome’s tempo and time signature.
1 . Press the [ ] button .
The button blinks, and you hear the metronome.
2 . Practice along with the metronome .
3 . To stop the metronome, press the [ ] button once again .
The button goes dark.
Changing the tempo
1 . Press the [ ] button .
The display shows the current tempo.
2 . Turn the [ ] knob to change the tempo .
Changing the time signature
1 . Press the [ ] button and [ ] button simultaneously .
The Metronome setting screen appears.
2 . Turn the [ ] knob to access the “Beat” screen .
3 . Press the [ ] knob to move the “-” “+” symbols to the
lower line of the screen .
4 . Turn the [ ] knob to select the time signature .
Available time
signatures
2/2, 3/2, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8,
8/8, 9/8, 12/8 (default value: 4/4)
5 . Press the [ ] button several times to return to the
previous screen .
You can record your own keyboard performance, and then play back to
check it.
Getting Ready to Record
1 . Select the tone that you want to play .
2 . You can sound the metronome if you like .
Press the [ ] button.
While listening to the metronome, specify the song’s tempo and time
signature.
Starting/Stopping Recording
3 . Press the [ 7 ] button .
The [ t ] button lights, the [ s ] button blinks, and the piano enters
record-standby mode.
If you decide to cancel recording, press the [
t ] button once again.
4 . Press the [ s ] button .
After a one-measure count, recording starts, and the [ 7 ] button and
[ s ] button are both lit.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [ s ] button. In this case, a count is not sounded.
5 . Play .
6 . To stop recording, press the [ s ] button once again .
Recording stops.
The performance is saved automatically.
Listening to the Recorded Performance
7 . Press the [ s ] button .
After you record, the newly recorded song is selected.
The recorded song starts playing back.
Deleting a Saved Song
1 . While holding down the [ 7 ] button, press the [ ] button .
The “Delete Song - Media” screen appears.
2 . Press the [ ] knob to confirm .
The “Delete Song - Song” screen appears.
3 . Press the [ ] knob to confirm .
A confirmation message appears.
4 . Turn the [ ] knob to select “Yes,” and press the [ ] knob
to confirm .
The deletion is executed.