Roland F701 88-Key Modern Digital Piano with Stand and Bench (White) - Manual (Page 11)

11
Using the Pedals
By pressing the pedals, you can apply effects to the sound of the
piano.
Soft pedal
Sostenuto pedal
Damper pedal
Damper pedal
(right)
Use this pedal to sustain the sound.
While this pedal is held down, notes
will be sustained for an extended time
even if you release your fingers from the
keyboard.
The resonance of the sound is affected by
how deeply you press the pedal.
Sostenuto pedal
(center) The notes you are pressing when this
pedal is depressed will be sustained.
Soft pedal
(left)
This pedal is used to make the sound
softer. Playing with the soft pedal
depressed produces a sound that is not as
strong as when otherwise played with the
equivalent strength. The softness of the
tone can be varied subtly by the depth to
which you press the pedal.
* When opening / closing the keyboard cover or you operate the
pedals, please be careful not to get your fingers pinched between the
movable part and the unit. In places where small children are present,
make sure that an adult provides supervision and guidance.
Using the Headphones
Use headphones if you want to perform without the sound being
heard nearby. This piano has two headphone jacks, two people can
also use headphones simultaneously.
1 . Connect headphones to the headphone jacks located
on the bottom panel .
Stereo 1/4”
phone plug
Stereo-mini
plug
NOTE
When you connect headphones, sound is no longer heard from
the piano’s speakers.
2 . Use the Volume buttons to adjust the volume of the
headphones .
MEMO
• A Headphones 3D Ambience effect will be applied, producing the
sensation that the sound is emanating from the piano itself even
when using headphones (p. 20).
• Whenever you are not using the headphones, you can hang them
on the headphone hook.
Basic Operations of Functions
To operate the functions of this piano, you use the [ ] (select/confirm)
knob and the [ ] (back) button.
Change an on-screen item or
value
Turn the [ ] knob
Confirm Press the [ ] knob
Move the “-” “+” symbols in the
screen
Press the [ ] knob
Return to the previous screen /
Exit the current screen
Press the [ ] button
Return to the default value Long-press the [ ] knob
Moving the “-” “+” symbols
In some screens, the upper and lower lines of the screen let you change
different items or values. (Example: The upper line changes the category, and
the lower line changes the tone.) In such screens, the location of the “-” “+”
symbols alternates between the upper and lower lines each time you press
the [ ] knob, and turning the [ ] knob changes the item or value of the line
where the symbols are located.
When the “-” “+” symbols are in the
lower line, change the tone
When the “-” “+” symbols are in the
upper line, change the category