ProSoft Technology ICX30-HWC - Manual (Page 56)

Ethernet/IP Support ICX30-HWC ♦ Industrial Cellular Gateway
User Manual 3G Cellular (M2M)
Page 56 of 64 ProSoft Technology, Inc.
June 22, 2015
6.3 ICX30-HWC Controller Tags
Controller Tags are used to monitor and control elements of the ICX30-HWC
from RSLogix 5000. You will only use the ICX30.xxx controller tag structure.
6.3.1 ICX30.CONTROL
This array contains trigger bits used to request functions from the ICX30-HWC.
After execution, the bit will automatically reset to '0', ready for the next execution.
ICX30.CONTROL. Value Description
Get_Status 0 or 1 Reads status data from the ICX30-HWC. This data will
populate in the ICX30.STATUS tag array.
Reset_Status 0 or 1 Resets status counters in the ICX30.STATUS tag array.
Write_SMS 0 or 1 Sends SMS message from the ICX30-HWC to the
target device(s). Maximum 160 characters.
Read_SMS 0 or 1 Reads SMS message being sent to the ICX30-HWC
from remote device. Maximum 160 characters.
Get_Digital_Analog_Input 0 or 1 Reads Digital/Analog Input values from the ICX30-
HWC.
Set_Digital_Output_1 0 or 1 Sets digital output 1.
Set_Digital_Output_2 0 or 1 Sets digital output 2.
Get_GPS 0 or 1 Reads GPS data from the ICX30-HWC.