ProSoft Technology ICX30-HWC User Manual
Page 18
Configuration Webpage
ICX30-HWC ♦ Industrial Cellular Gateway
User Manual
3G Cellular (M2M)
Page 18 of 64
ProSoft Technology, Inc.
June 22, 2015
3 Enter the Access Point Name (APN) information in the APN
N
AME
field. This
information is provided from your cellular provider. Click A
PPLY
C
HANGES
.
The ICX30-HWC will reboot.
4 After the ICX30-HWC reboots, it establishes a PPP (Point to Point Protocol or
"dial" up connection) link to your cellular provider network, also called
registering on the network, and receives an IP address.
5 When the ICX30-HWC has received its IP address from your cellular
provider, a connection to the Internet or the cellular network is also available
for computers or other devices to connect directly to the ICX30-HWC.