ProSoft Technology ICX30-HWC - Manual (Page 10)

Start Here ICX30-HWC ♦ Industrial Cellular Gateway
User Manual 3G Cellular (M2M)
Page 10 of 64 ProSoft Technology, Inc.
June 22, 2015
1.2 Package Contents
The following components are included with the ICX30-HWC, and are required
for installation and configuration.
Important: Before beginning the installation, please verify that all of the following items are
present.
Qty. Part Name Part Number Part Description
1 ICX30-HWC Cellular
Gateway ICX30-HWC 3G 3G Cellular (M2M)
1 Antenna AO822S-OA 2dBi Omni RP-SMA articulating
890 to 960 MHz, 1710 to 2200 MHz
1 ProSoft Solutions
DVD DVD-001 Contains documentation for the ICX30-HWC
If any of these components are missing, please contact ProSoft Technology
Support for replacement parts.
1.3 System Requirements
The following system requirements are the recommended minimum
specifications to successfully install and run:
 Supported operating systems:
- Microsoft Windows
®
Vista
- Microsoft Windows XP Professional with Service Pack 1 or 2
- Microsoft Windows 7 Professional (32-or 64-bit)
- Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3
- Microsoft Windows Server 2003
 Pentium ® II 450 MHz minimum. Pentium III 733 MHz (or better)
 128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
 100 Mbytes of free hard disk space (or more based on application
requirements)
 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024 x 768 recommended)
 DVD drive
 Ethernet hub with standard RJ45 Ethernet cable
or
Ethernet port with RJ45 crossover cable for direct connection to module
In addition, you will need:
 A connection to an existing wired or wireless Ethernet network, with a Static
or Dynamic IP address for your computer
 Static IP address, Subnet Mask and Gateway address for each device you
plan to install. Obtain this information from your system administrator.