ProSoft Technology ICX30-HWC - Manual (Page 28)

Configuration Webpage ICX30-HWC ♦ Industrial Cellular Gateway
User Manual 3G Cellular (M2M)
Page 28 of 64 ProSoft Technology, Inc.
June 22, 2015
Port Forward
Port forwarding allows a remote computer or device to access a device on the
ICX30-HWC LAN.
Port Forwarding Description
IP Address Redirect IP address: Target device IP address on the LAN
WAN Port WAN port number range (1 to 65535)
LAN Port LAN port number range (1 to 65535)
Note: There is a limit of nine (9) entries in the Port Forwarding table.
MAC Filtering
Entries in this table are used to restrict certain types of data packets from your
local network to the Internet through the ICX30-HWC. These filters can be helpful
in securing or restricting access to your local network.
MAC Filtering Description
MAC Address MAC address of the device allowed to connect to the internet
Dynamic DNS
Dynamic DNS (DDNS) is a method of mapping IP addresses that are assigned to
a domain name.
Dynamic DNS Description
Service Provider/Server DDNS service web page
Domain Name Sets the DDNS host name or alias from DDNS server
User Name/Email User name to log into the DDNS server
Password/Key Password to log into the DDNS server
SNMP
Simple Network Management Protocol (SNMP) is a set of protocols for managing
a network. It is used to configure and collect information from network devices.
SNMP Description
Activate Enable or disable SNMP manager
System Name System name of SNMP network
System Contact Email address of SNMP network administrator
Write Community Name Private: Write community string disabled (default)
Public: Write community string enabled