ProSoft Technology ICX30-HWC - Manual (Page 36)

Configuration Webpage ICX30-HWC ♦ Industrial Cellular Gateway
User Manual 3G Cellular (M2M)
Page 36 of 64 ProSoft Technology, Inc.
June 22, 2015
Ping
You can ping a remote device to determine whether you can connect to it.
Ping Description
IP Address/Host Name WAN IP address or host name to be pinged
Backup
The configuration of the ICX30-HWC can be saved to a file for backup. The file
can also be loaded back into the ICX30-HWC. Restoring to factory default can be
done here as well as pressing and holding the RESET button on the top of the
radio.
Backup (Save/Reload) Description
Save Settings to File Saves configuration to a file
Load Settings from File Browse for the selected configuration file and click U PLOAD
Restore to Factory Default Restores to ICX30-HWC factory default
Logs
Record system logs of ICX30-HWC activity for analysis.
Logs Description
Enable Logs System logs enabled for review
General
Adjust the settings to access the configuration web page here.
General Description
Web Access Web access via HTTPS or HTTP, and Port Number
HTTP Access on WAN Allows or blocks web page access from the WAN
NAT Enable or disable network address translation
Firmware Update
Upgrade the ICX30-HWC firmware here.
Upgrade Description
Select File B ROWSE and select the firmware file and click U PGRADE