ProSoft Technology ICX30-HWC - Manual (Page 42)

Hardware Installation ICX30-HWC ♦ Industrial Cellular Gateway
User Manual 3G Cellular (M2M)
Page 42 of 64 ProSoft Technology, Inc.
June 22, 2015
3.3 LED Indicators
LED Color State Description
Power Green Steady Remains lit while powered up.
RF Transmit Green Blinking Data being transmitted out to the 3G network.
RF Receive Green Blinking Data being received from the 3G network.
Serial Green Blinking Data being transmitted or received on the serial
port.
Ethernet Green Steady GPS link established and running.
Amber Steady GPS link not established, GPS antenna is
disconnected.
NS Cellular tower Network Status.
Off Steady -ICX30-HWC is powered off.
-ICX30-HWC is waiting to register with the cellular
network during power-up cycle.
Green Steady ICX30-HWC connected to the cellular tower.
Green Blinking ICX30-HWC is trying to connect to the cellular
tower. The signal is too weak.
Red Steady -A duplicate IP address has been discovered on
the network.
-Non-recoverable major network fault.
Red Blinking -One or more established connections has timed
out. The state remains until all time out connections
have been re-established or a reset occurs.
-Recoverable minor fault has occurred.
Amber Steady Power-up sequence and tests.
MS Module Status
Off Steady ICX30-HWC is powered off.
Green Steady ICX30-HWC is operating correctly with all
initialization complete.
Green Blinking ICX30-HWC is in process of configuring or waiting
for configuration information.
Red Steady ICX30-HWC has detected a non-recoverable major
fault, (RAM error, corrupt storage, non unique MAC
address) all errors which require more intervention
than a power cycle to correct.
Red Blinking ICX30-HWC is booting up and reading it's
configuration.
-Recoverable minor fault detected, such as
incomplete configuration.
-Missing SIM card.
Amber Steady Power-up sequence and tests.
Signal Strength Green Steady 3 LED's = Down to -83dB
2 LED's = -85dB to -95dB
1 LED = -97dB to -113dB