ProSoft Technology ICX30-HWC - Manual (Page 38)

Hardware Installation ICX30-HWC ♦ Industrial Cellular Gateway
User Manual 3G Cellular (M2M)
Page 38 of 64 ProSoft Technology, Inc.
June 22, 2015
3.2 Connecting the Radio to a Network Device
The application ports are located on the bottom of the radio.
 The I/O port uses (2) Discrete Inputs/Outputs and (1) Analog Input
 The Ethernet port uses a standard RJ45 connector
 The serial port uses a standard DB9 connector for RS-232 connectivity
3.2.1 I/O Terminal
There are two digital input/output and two analog terminals on the ICX30-HWC.
An SMS text message can be configured and sent to your phone upon change of
the digital input(s). (See Configuration Webpage)
Terminal Description
D1 Digital terminal 1 can be configured as Input or Output
DG Digital signal ground
D2 Digital terminal 2 can be configured as Input or Output
AG Analog signal ground
A1 Analog input 1 voltage (0 ~ 12 V)
A2 Analog input 2 current (0 ~ 20 mA @ 2.2 V)