ProSoft Technology 5202-DFNT-DFCM4 - Manual (Page 72)

Reference DFCM ♦ ProLinx Gateway
Driver Manual DF1 Master/Slave
Page 72 of 88 ProSoft Technology, Inc.
October 15, 2010
Data Bits : 8 #5, 6, 7 or 8
Stop Bits : 1 #1 or 2
RTS On : 0 #0-65536 mSec before message
RTS Off : 0 #0-65536 mSec after message
Use CTS Line : No #Use CTS modem control line (Y/N)
Request Timeout : 1000 #Request message timeout (0-65535 milliseconds)
Busy Timeout : 500 #Port Busy timeout (0-65535 milliseconds)
ACK Timeout : 1000 #DLE-ACK timeout (0-65535 milliseconds)
Retry Count : 0 #Response failure retry count
[DF1 Slave Port 2]
Enabled : Yes #Y=Use port, N=Do not use port
RS Interface : 0 #0=RS-232, 1=RS-485, 2=RS-422
Protocol : Full #F=Full-Duplex, H=Half-Duplex
Baud Rate : 192 #Baud rate for port 110-115200
Parity : None #N=None,O=Odd,E=Even
Data Bits : 8 #5, 6, 7 or 8
Stop Bits : 1 #1 or 2
RTS On : 0 #0-65536 mSec before message
RTS Off : 0 #0-65536 mSec after message
Use CTS Line : No #Use CTS modem control line (Y/N)
Request Timeout : 1000 #Request message timeout (0-65535 milliseconds)
Busy Timeout : 500 #Port Busy timeout (0-65535 milliseconds)
ACK Timeout : 1000 #DLE-ACK timeout (0-65535 milliseconds)
Retry Count : 0 #Response failure retry count