ProSoft Technology 5202-DFNT-DFCM4 - Manual (Page 35)

DFCM ♦ ProLinx Gateway DFCM Protocol Configuration
DF1 Master/Slave Driver Manual
ProSoft Technology, Inc. Page 35 of 88
October 15, 2010
6.2.14 Response Timeout
Number of milliseconds to wait for response to command. The value is set
depending upon the communication network used and the expected response
time of the slowest device on the network. Valid values are 0 to 5000
milliseconds.
6.2.15 Retry Count
0 to 10
This parameter specifies the number of times a command will be retried if it fails.