ProSoft Technology 5202-DFNT-DFCM4 - Manual (Page 39)

DFCM ♦ ProLinx Gateway Commands Supported by the Module
DF1 Master/Slave Driver Manual
ProSoft Technology, Inc. Page 39 of 88
October 15, 2010
7 Commands Supported by the Module
The format of each command in the list depends on the function being executed.
To simplify command construction, the module uses its own set of function codes
to associate a command with a DF1 command/function type. The tables below
list the functions supported by the module:
Basic Command Set Functions
Function
Code Comman
d Function Definition PLC5 SLC500 &
MicroLogix Power-
monitor II ControlLogix
1 0x00 N/A Protected Write X X
2 0x01 N/A Unprotected Read X X X
3 0x02 N/A Protected Bit Write X X
4 0x05 N/A Unprotected Bit Write X X
5 0x08 N/A Unprotected Write X X X
PLC-5 Command Set Functions
Function
Code Command Function Definition PLC5 SLC500 &
MicroLogix Power-
monitor II ControlLogix
100 0x0F 0x00 Word Range Write
(Binary Address) X X
101 0x0F 0x01 Word Range Read
(Binary Address) X X
102 0x0F 0x26 Read-Modify-Write
(Binary Address) X X
150 0x0F 0x00 Word Range Write
(ASCII Address) X X
151 0x0F 0x01 Word Range Read
(ASCII Address) X X
152 0x0F 0x26 Read-Modify-Write
(ASCII Address) X X