ProSoft Technology 5202-DFNT-DFCM4 - Manual (Page 17)

DFCM ♦ ProLinx Gateway DFCM Slave Driver Operation
DF1 Master/Slave Driver Manual
ProSoft Technology, Inc. Page 17 of 88
October 15, 2010
3 DFCM Slave Driver Operation
In This Chapter
File Simulation ....................................................................................... 18
Example Slave Port Application ............................................................ 19
Slave Port Command Support ............................................................... 20
This section discusses several characteristics in the module’s configuration and
operation that are unique to the emulated DF1 slave ports. In order to support
several types of DF1 devices, the slave ports require additional configuration
parameters. If the basic command set is used, these features need not be
considered. These features must be considered if the module has the potential of
receiving a PLC5 or SLC command function.