ProSoft Technology 5202-DFNT-DFCM4 - Manual (Page 28)

LED Indicators DFCM ♦ ProLinx Gateway
Driver Manual DF1 Master/Slave
Page 28 of 88 ProSoft Technology, Inc.
October 15, 2010
5.3 DFNT Pass-Through (Debug) Port LEDs
LED State Description
Fault Off Normal operation.
Red Solid If the CFG LED is on, the Debug/Configuration mode is active on the
Debug port.
If the CFG LED is off, a critical error has occurred. Program executable
has failed or has been user-terminated and is no longer running. Press
R
ESET
p/b or cycle power to clear error. If not, use the Debug
procedures described later in this manual.
CFG Off Normal operation.
Amber Solid If the Fault LED is on, the Debug/Configuration Mode is active on the
Debug port.
If the Fault LED is off, the unit is in the configuration mode. The
configuration file is being read and the unit is implementing the
configuration values and initializing the hardware. This will occur during
power cycle, or after pressing R
ESET
pushbutton. It also occurs after a
cold/warm boot command is received.