beautypg.com

ProSoft Technology 5202-DFNT-DFCM4 User Manual

Page 71

background image

DFCM ♦ ProLinx Gateway

Reference

DF1 Master/Slave

Driver Manual

ProSoft Technology, Inc.

Page 71 of 88

October 15, 2010

8.7

5102-DFS3-DFM Configuration Information

The following example shows the configuration file for the 4102-DFS3-DFM only.

If you do not have this module, ignore this topic.

# DF1R.CFG
#
# This file contains the configuration for the DF1 slave communication
# module.
#
# LOCATION : ProSoft Technology
# DATE :
#
# This section defines the configuration for the DF1 master device
# simulated on Port 0.
#

[Module]
Module Name: x102-DFS3-DFM

[DF1 Master Port]
Local Station ID : 1 #Source ID used in DF1 requests
Termination Type : CRC #B=BCC, C=CRC
Baud Rate : 192 #Baud rate for port 110-115200
Parity : None #N=None,O=Odd,E=Even,M=Mark,S=Space
Data Bits : 8 #5, 6, 7 or 8
Stop Bits : 1 #1 or 2
RTS On : 0 #0-65536 mSec before message
RTS Off : 0 #0-65536 mSec after message
Use CTS Line : No #Use CTS modem control line (Y/N)
Response Timeout : 5000 #Response message timeout (0-65535
milliseconds)
ACK Timeout : 100 #DLE-ACK timeout (0-65535 milliseconds)
Retry Count : 3 #Response failure retry count

[DF1 Slave Port 0]
Enabled : Yes #Y=Use port, N=Do not use port
RS Interface : 0 #0=RS-232, 1=RS-485, 2=RS-422
Protocol : Full #F=Full-Duplex, H=Half-Duplex
Baud Rate : 9600 #Baud rate for port 110-115200
Parity : None #N=None,O=Odd,E=Even,M=Mark,S=Space
Data Bits : 8 #5, 6, 7 or 8
Stop Bits : 1 #1 or 2
RTS On : 0 #0-65536 mSec before message
RTS Off : 0 #0-65536 mSec after message
Use CTS Line : No #Use CTS modem control line (Y/N)
Request Timeout : 1000 #Request message timeout (0-65535 milliseconds)
Busy Timeout : 550 #Port Busy timeout (0-65535 milliseconds)
ACK Timeout : 500 #DLE-ACK timeout (0-65535 milliseconds)
Retry Count : 0 #Response failure retry count

[DF1 Slave Port 1]
Enabled : Yes #Y=Use port, N=Do not use port
RS Interface : 0 #0=RS-232, 1=RS-485, 2=RS-422
Protocol : Full #F=Full-Duplex, H=Half-Duplex
Baud Rate : 9600 #Baud rate for port 110-115200
Parity : No #N=None,O=Odd,E=Even