ProSoft Technology 5228-DFNT-HART - Manual (Page 82)

Reference ProLinx-HART ♦ ProLinx Gateway
Driver Manual HART Master with Analog I/O
Page 82 of 104 ProSoft Technology, Inc.
October 13, 2011
COMMAND 108 - Write Burst Mode Command Number
Description
This command sets the command number that the HART device will use in Burst Mode.
Write Parameters
Word High Byte Low Byte
0 Burst Mode Command Number Burst Mode Command Number
Floating Point Data Returned
NONE
Integer Data Returned
Word High Byte Low Byte
0 STATUS WORD
1 Burst Mode Command Number 0