Dhcp server – PLANET WNAP-1260 User Manual

Page 86

Text mode
Original mode

User’s Manual of WNAP-1260

-78-

(5) L2TP
If the ISP provides the user name and password for L2TP dialup, select L2TP.

Figure 8-11

For details of parameter settings for this page, refer to previous parameter descriptions for PPTP.

8.6.3. DHCP Server

Choose Network Settings > DHCP Server and the DHCP Server page is displayed.

DHCP refers to Dynamic Host Configuration Protocol. If Use Device as DHCP Service is selected,
WNAP-1260 automatically assigns IP addresses to comupters in the LAN. Users do not need to
configure TCP/IP protocol paramters such as the IP address, the subnet mask, the gateway, and the
DNS server information for computers connected to the router’s LAN.