PLANET WNAP-1260 - Manual (Page 85)

User’s Manual of WNAP-1260
-77-
recommend you to use this connection mode.
 Dial On Demand: If you select it, the system automatically
establishes a connection when a network access request from the
LAN is received. If no network access request is sent from the
LAN within the specified time of Idle Timeout, the system
automatically interrupts the connection. If you pay for Internet
access by time, you are recommended to use this connection
mode, which effectively saves the expense of Internet access.
Manually Connect: If you select it, you need to manually set dialup
connection after startup.
 Idle Timeout:
If the system does not detect any Internet access behavior within the
specified time of Idle Timeout, the system interrupts the Internet
connection
 My IP Address: Enter your IP address. You can also leave this field blank
 Subnet Mask: Enter the subnet mask. You can also leave this field blank
 Sever Address:
Enter the IP address of the server. You can also leave this field
blank
 Gateway IP
Address: Enter the IP address of the gateway. You can also leave this field
blank
 Domain Name
Server (DNS)
Address:
Select Use These DNS Servers if you know that your ISP does not
automatically transmit DNS addresses to the router during login.
And enter the IP address of your ISP’s primary DNS server. Enter a
secondary DNS server address if available
 MTU Size:
Set the maximum transmission unit. The default value is
recommended
 Router MAC
Address:
See descriptions on setting Router MAC Address for DHCP
After finishing settings, click Apply to save the settings.