beautypg.com

Starting setup in web ui – PLANET WNAP-1260 User Manual

Page 30

background image

User’s Manual of WNAP-1260

-22-

4.6. Starting Setup in Web UI

Default SSID: WiFiRepeater-001

*Default Wireless Security: None

STEP 1:

Please use your PC to site survey the wireless signal of WNAP-1260, and connect
your PC with it wirelessly.

STEP 2:

1. Assign a static IP address to your PC which should be in the same network

segment with the WNAP-1260. You may choose from 192.168.1.2 to
192.168.1.254, except the default IP address “192.168.1.253” of WNAP-1260.

2. Open the web browser on your PC, key in the IP address (http://192.168.1.253)

of the WNAP-1260 in the address bar, and then press enter.

3. The default User name and Password are both “admin”. Enter them and then

click OK.

See also other documents in the category PLANET Routers: