PLANET WNAP-1260 - Manual (Page 123)

User’s Manual of WNAP-1260
-115-
Figure 9-8
Object Description
 Region: Select the region where you are located.
 Enable SSID
Broadcast:
If enabled, the router broadcasts its SSID in the wireless network.
Wireless clients can scan the SSID and access the wireless network
under the SSID.
 Enable Wireless
Isolation:
If selected, wireless clients connected to the network of the same
SSID can access the Internet only, but cannot communicate with
each other.
 Name (SSID):
Set the name for the wireless network. The SSID can contain up to
32 characters and can be letters, numerals, underlines, and any
combinations of them. The SSID is case-sensitive
 Mode: Select the wireless mode. Mixed 802.11b/g/n is recommended.
 Channel:
The channel for transmitting wireless signals. When you select Auto,
WNAP-1260 automatically selects the best channel from the
available channels according to actual situations.
The default channel is Auto.
 Band Width: The bandwidth occupied for wireless signal transmission.
 Max Transmission
Rate:
The maximum transmission rate of WNAP-1260.
 Security Options:
Set the security encryption of the wireless network, to prevent
unauthorized access and listening.
Security Options
- None