PLANET WNAP-1260 - Manual (Page 117)

User’s Manual of WNAP-1260
-109-
Chapter 9. Web Configuration for the WDS Mode
9.1. WDS Mode Topology
In the WDS mode, WNAP-1260 expands wireless coverage of the existing AP. Computers can connect
to WNAP-1260 in either a wired or wireless way.
9.2. Hardware Setting
Set the three-way switch on the side panel to Repeater after WNAP-1260 is powered on.
9.3. Running Status
Log in to the configuration page after the system is started.
Click Running Status and the extended navigation menu is shown as follows:
Click the submenu to enter a specific configuration page.
9.3.1. System Status
Choose Running Status > System Status and the System Status page is displayed.