PLANET WNAP-1260 - Manual (Page 82)

User’s Manual of WNAP-1260
-74-
 IP Address:
Enter the WAN IP address provided by the ISP. The parameter must
be entered
 IP Subnet Mask:
Enter the WAN subnet mask provided by the ISP. It varies with the
network type. It is usually 255.255.255.0 (Class C)
 Gateway IP
Address: Enter the IP address of the gateway provided by the ISP. It is the IP
address used for connecting to the ISP.
 Primary DNS: Enter the IP address of the primary DNS server if necessary
 Secondary DNS:
Enter the IP address of that DNS server if the ISP provides another
DNS server
 MTU Size:
Set the maximum transmission unit. The default value is
recommended
 Router MAC
Address:
See descriptions on setting Router MAC Address for DHCP.
After finishing settings, click Apply to save the settings.
(3) PPPoE
If the ISP provides the user name and password for PPPoE (Point-to-Point Protocol over Ethernet)
dialup, select PPPoE.
Figure 8-9