Chapter 10. web configuration for the client mode, Client mode topology, Hardware setting – PLANET WNAP-1260 User Manual

Page 130: Running status, System status

Text mode
Original mode

User’s Manual of WNAP-1260

-122-

Chapter 10. Web Configuration for the Client Mode

10.1. Client Mode Topology

In Client Mode, the WNAP-1260 is supposed to act as a wireless station for the PC or other wired-only
network device. Users can site survey the available local AP and choose someone to connect with.

10.2. Hardware Setting

Set the three-way switch on the side panel to Client after WNAP-1260 is powered on.

10.3. Running Status

Log in to the configuration page after the system is started.
Click Running Status and the extended navigation menu is shown as follows:

Click the submenu to enter a specific configuration page.

10.3.1. System Status

Choose Running Status > System Status and the System Status page is displayed.