PLANET GSD-1002M - Manual (Page 90)

User’s Manual of GSD-1002M
Display the current typ  Type
Display the link state  Link State
Display the active member  Active Member
Display the standby member  Standby Member
 Modify
Click to modify LAG configuraiton.
4.4.3 LAG Port Setting
This page allows setting configuration for per LAG. The LAG Port Setting screens in Figure 4-4-7 & Figure 4-4-8 appear.
Figure 4-4-7 LAG Port Setting Information page screenshot
The page includes the following fields:
Object Description
Select LAG number for this drop down list.  LAG Selet
 Enable Indicates the LAGt state operation. Possible state are:
Enabled - Start up the LAG manually.
Disabled - Shutdown the LAG manually.
 Speed Select any available link speed for the given switch port. Draw the menu bar to
select the mode.
 Auto - Setup Auto negotiation.
 Auto-10M - Setup 10M Auto negotiation.
 Auto-100M - Setup 100M Auto negotiation.
 Auto-1000M - Setup 1000M Auto negotiation.
 Auto-10/100M - Setup 10/100M Auto negotiation.
 10M - Setup 10M Force mode.
 100M - Setup 100M Force mode.
 1000M - Setup 1000M Force mode.
90