3 mld group table, 4 mld router setting – PLANET GSD-1002M User Manual
Page 161

User’s Manual of GSD-1002M
4.7.4.3 MLD Group Table
This page provides MLD Group Table. The MLD Group Table screen in
Figure 4-7-26
appears.
Figure 4-7-26 MLD Group Table page screenshot
The page includes the following fields:
Object
Description
Display the current VID.
VLAN ID
Display multicast IP address for a specific multicast service.
Group IP Address
Display the current member port.
Member Port
Member types displayed include Static or Dynamic, depending on selected
options.
Type
Display the current life.
Life(Sec)
4.7.4.4 MLD Router Setting
Depending on your network connections, MLD snooping may not always be able to locate the MLD querier. Therefore, if the
MLD querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Managed
Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the
attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the Managed Switch.
The MLD Router Setting screens in
Figure 4-7-27
&
Figure 4-7-28
appear.
Figure 4-7-27 Add Router Port page screenshot
The page includes the following fields:
161