PLANET GSD-1002M - Manual (Page 106)

User’s Manual of GSD-1002M
By default, the field is set to All.
 Ingress Filtering  If ingress filtering is enabled (checkbox is checked), frames classified to a
VLAN that the port is not a member of get discarded.
 If ingress filtering is disabled, frames classified to a VLAN that the port is not a
member of are accepted and forwarded to the switch engine.
However, the port will never transmit frames classified to VLANs that it is not a
member of.
Enable/disable uplink function in trunk port.  Uplink
Configure the type (TPID) of the protocol of switch trunk port.  TPID
Buttons
: Click to apply changes.
Figure 4-5-6 Edit Interface Setting page screenshot
The page includes the following fields:
Object Description
The switch port number of the logical port.  Port
 Interface VLAN Mode Display the current interface VLAN mode.
Display the current PVID.  PVID
 Accepted Frame Type Display the current access frame type.
Display the current ingress filtering.  Ingress Filtering
Display the current uplink mode.  Uplink
Display the current TPID.  TPID
106