PLANET GSD-1002M - Manual (Page 130)

User’s Manual of GSD-1002M
Figure 4-6-4 Global Settings page screenshot
The page includes the following fields:
Object Description
Enable or disable the STP function. The default value is "Disabled".  Enable
Set the BPDU forward method.  BPDU Forward
The path cost method is used to determine the best path between devices.
Therefore, lower values should be assigned to ports attached to faster media,
and higher values assigned to ports with slower media.
 PathCost Method
The STP protocol version setting. Valid values are STP-Compatible,
RSTP-Operation and MSTP-Operation.
 Force Version
 Configuration Name Identifier used to identify the configuration currently being used.
 Configuration Revision Identifier used to identify the configuration currently being used. The values
allowed are between 0 and 65535.
The default value is 0.
Buttons
: Click to apply changes.
Figure 4-6-5 STP Infirmations page screenshot
130