PLANET GSD-1002M - Manual (Page 185)

User’s Manual of GSD-1002M
Figure 4-8-18 Egress Bandwidth Control Settings page screenshot
The page includes the following fields:
Object Description
Select port number for this drop down list.  Port
Enable or disable the port rate policer. The default value is "Disabled".  State
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
 Rate (Kbps)
Buttons
: Click to apply changes.
Figure 4-8-19 Egress Bandwidth Control Status page screenshot
The page includes the following fields:
Object Description
The switch port number of the logical port.  Port
Display the current egress rate limit.  Egress Rate Limit
(Kbps)
185