PLANET GSD-1002M - Manual (Page 109)

User’s Manual of GSD-1002M
Command Usage
To configure protocol-based VLANs, follow these steps:
1. First configure VLAN groups for the protocols you want to use. Although not mandatory, we suggest configuring a
separate VLAN for each major protocol running on your network. Do not add port members at this time.
2. Create a protocol group for each of the protocols you want to assign to a VLAN using the Protocol VLAN Configuration
page.
3. Then map the protocol for each interface to the appropriate VLAN using the Protocol VLAN Port Configuration page.
This Page allows for configures protocol-based VLAN Group Setting. The portocol-based VLAN screens in Figure 4-5-9 &
Figure 4-5-10 appear.
Figure 4-5-9 Add Protocol VLAN Group page screenshot
The page includes the following fields:
Object Description
Protocol Group ID assigned to the Special Protocol VLAN Group.  Group ID
 Frame Type Frame Type can have one of the following values:
 Ethernet II
 IEEE802.3_LLC_Other
 RFC_1042
Note: On changing the Frame type field, valid value of the following text field will
vary depending on the new frame type you selected.
 Protocol Value
(0x0600-0xFFFE) Valid value that can be entered in this text field depends on the option selected
from the the preceding Frame Type selection menu.
Valid values for frame type ranges from 0x0600-0xfffe
Buttons
: Click to apply changes.
109