PLANET FNSW-2400PS - Manual (Page 7)

User’s Manual of FNSW-2400PS
1.3 Features
¾ Physical Port
„ 24-Port 10/100Mbps Fast Ethernet ports with PoE Injector
„ Reset button for system management
¾ PoE
Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
Up to 24 IEEE 802.3af devices powered
Supports PoE Power up to 15.4 Watts for each 802.3af PoE port
Auto detect powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
¾ Layer 2 Features
„ Auto-MDI/MDI-X detection on each RJ-45 port
„ Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE Frame Flow control
(Full-Duplex)
„ Support VLAN :
- IEEE 802.1Q Tag-based VLAN
- Port-Based VLAN
- MTU VLAN (Multi-Tenant Unit VLAN)
„ Support Link Aggregation
− up to 2 trunk groups
− up to 4 Fast Ethernet ports per trunk group
− IEEE 802.3ad LACP (Link Aggregation Control Protocol)
„ Support Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
- Loopback Detection
„ Port Mirroring to monitor the incoming or outgoing traffic on a particular port
¾ Quality of Service
„ 2 priority queues on all switch ports
„ Traffic classification:
- Port-Based priority
- IEEE 802.1p-Based priority
- IP TOS / DSCP-Based priority
- TCP / UDP Port Based QoS
„ Strict priority and Weighted Round Robin (WRR) CoS policies
„ In/Out rate limit control on each port
„ Broadcast Storm Control support
¾ Multicast
„ Supports IGMP Snooping v1 and v2
¾ Security
„ MAC address filter
„ TCP & UDP filter on each port
- 7 -