PLANET FNSW-2400PS - Manual (Page 48)

User’s Manual of FNSW-2400PS
• Bridge Priority The switch with the lowest value has the highest priority and is selected
as the root. If the value is changed, the user must reboot the switch.
The value must be a multiple of 4096 according to the protocol standard
rule.
• Hello Time The time that controls the switch to send out the BPDU packet to check
STP current status.
Enter a value between 1 through 10.
• Max Age
The number of seconds a switch waits without receiving Spanning-tree
Protocol configuration messages before attempting a reconfiguration.
Enter a value between 6 through 40.
• Forward Delay
The number of seconds a port waits before changing from its Rapid
Spanning-Tree Protocol learning and listening states to the forwarding
state.
Enter a value between 4 through 30.
• Bridge Status The Status of Bridge.
• Root Status The Status of Root.
Table 4-23 Descriptions of the STP Bridge Settings Configuration Screen Objects
4.7.2 STP Port Settings
This section introduces detail information of STP Port Settings of POE Web Smart Ethernet Switch; the screen in Figure
4-40 appears and Table 4-24 descriptions the STP Port Settings Configuration of POE Web Smart Ethernet Switch.
Figure 4-40 STP Port Settings Web Page Screen
- 48 -