Switch management, 1 overview, 2 management method – PLANET FNSW-2400PS User Manual
Page 14: 1 web management, Verview, Anagement, Ethod
User’s Manual of FNSW-2400PS
3. SWITCH MANAGEMENT
This chapter describes how to manage the POE Web Smart Ethernet Switch. Topics include:
- Overview
- Management method
- Logging on to the POE Web Smart Ethernet Switch
3.1 Overview
The POE Web Smart Ethernet Switch provides a user-friendly, Web interface. Using this interface, you can perform var-
ious switch configuration and management activities, including:
Please refer to the following Chapter 4 for the details.
3.2 Management Method
User can manage the POE Web Smart Ethernet Switch by Web Management via a network connection.
3.2.1 Web Management
The PLANET FNSW-2400PS provide a built-in browser interface. You can manage the Switch remotely by having a re-
mote host with Web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.
The following shows how to startup the Web Management of the Switch, please note the Switch is configured through an
Ethernet connection, make sure the manager PC must be set on the same IP subnet address, for example, the default IP
address of the Switch is 192.168.0.100 (the factory-default IP address), then the manager PC should be set at
192.168.0.xxx (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Use Internet Explorer 7.0 or above Web browser, enter default IP address
After entering the username and password (default user name and password is “admin”) in login screen
Default IP : 192.168.0.100
Default Username: admin
Default Password: admin
- 14 -