PLANET FNSW-2400PS - Manual (Page 29)

User’s Manual of FNSW-2400PS
4.4 VLAN Setting
This section provides VLAN Mode, VLAN Member and Multi to 1 Setting from POE Web Smart Ethernet Switch, the
screen in
Figure 4-22 appears and Table 4-10 describes the system object of POE Web Smart Ethernet Switch.
Figure 4-22 VLAN Setting Web Page Screen
Object Description
VLAN Mode Allow to select VLAN mode of POE Web Smart Ethernet Switch. Explained in section 4.4.1.
VLAN Member Allow to Modify the VLAN member port of POE Web Smart Ethernet Switch. Explained in
section 4.4.2.
Multi to 1 Setting Allow to Modify and Enable the function from POE Web Smart Ethernet Switch. Explained in
section 4.4.3.
Table 4-10 Descriptions of the VLAN Setting Web Page Screen Objects
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic
so only members of the VLAN receive traffic from the same VLAN members. Basically, creating a VLAN from a switch is
logically equivalent of reconnecting a group of network devices to another Layer 2 switch. However, all the network devices
are still plug into the same switch physically.
The Switch supports IEEE 802.1Q (tagged-based) and Port-Base VLAN setting in web management page. In the default
configuration, VLAN support is “No VLAN”.
- 29 -