PLANET FNSW-2400PS - Manual (Page 53)

User’s Manual of FNSW-2400PS
• Type Allow to selects port trunk type from POE Web Smart Ethernet Switch, the
available options are LACP and Static. Default mode is LACP.
• Operation Key The LACP operation key must be set to the same value for ports that
belong to the same LAG.
Range: 1-65535;
Default Link Group 1: 1
Default Link Group 2: 2
• Time Out The time out configuration mode command assigns an administrative
LACP timeout. To reset the default administrative LACP timeout use the
no form of this command
, the available options are shown as below:
Long Time Out
Short Time Out
Default mode is Short Time Out.
• Activity Allow link group to automatically sends LACP protocol packets or not.
Default mode is Passive.
Table 4-26 Descriptions of the Trunk Setting Screen Objects
4.9 DHCP Relay Agent
This function provides DHCP Relay Agent of POE Web Smart Ethernet Switch; the screen in Figure 4-43 appears and
Table 4-27 descriptions the DHCP Relay Agent of POE Web Smart Ethernet Switch.
Figure 4-43 DHCP Relay Agent Web Page Screen
- 53 -