PLANET FNSW-2400PS - Manual (Page 32)

User’s Manual of FNSW-2400PS
Default VLANs
The Switch initially configures one VLAN, VID = 1, called "default." The factory default setting assigns all ports on the
Switch to the "default". As new VLAN are configured in Port-based mode, their respective member ports are removed
from the "default."
Base on the Switch chipset specification, the Switch supports SVL(Shared VLAN Learning) ,
all VLAN groups share the same Layer 2 learned MAC address table.
4.4.1 VLAN Mode
This section provides VLAN Configuration from POE Web Smart Ethernet Switch, the screen in Figure 4-23 appears and
Table 4-11 describes the VLAN Configuration object of POE Web Smart Ethernet Switch.
Figure 4-23 VLAN Mode Web Page Screen
The page includes the following fields:
Object Description
• VLAN Mode Provide different VLAN operation mode, the available options are shown as be-
low:
Tag Base VLAN
Port Based VLAN
Default mode is Port Base VLAN.
• Change VLAN mode
Button
Changing current VLAN mode of POE Web Smart Ethernet Switch.
Table 4-11 Descriptions of the VLAN Mode Screen Objects
- 32 -