PLANET FNSW-2400PS - Manual (Page 19)

User’s Manual of FNSW-2400PS
4.2.2 IP Configuration
This section provides change the IP Address, Subnet Mask and Gateway, the screen in Figure 4-5 appears.
Figure 4-5 IP Configuration Web Page Screen
The page includes the following fields:
Object Description
IP Address
Assign the IP address that the network is using.
If DHCP client function is enabled, this switch is configured as a DHCP
client. The network DHCP server will assign the IP address to the switch
and display it in this column.
The default IP is 192.168.0.100 or the user has to assign an IP address
manually when DHCP Client is disabled.
Subnet Mask
Assign the subnet mask to the IP address.
If DHCP client function is disabled, the user has to assign the subnet
mask in this column field.
The default subnet mask is 255.255.255.0.
Gateway
Assign the network gateway for the switch.
If DHCP client function is disabled, the user has to assign the gateway in
this column field.
The default gateway is 192.168.0.254.
IP Configure
Select static IP address or DHCP client function
When DHCP function is enabled, the POE Web Smart Ethernet Switch
will be assigned an IP address from the network DHCP server. The de-
fault IP address will be replaced by the assigned IP address on DHCP
server. After the user clicks Apply, a popup dialog shows up to inform the
user that when the DHCP client is enabled, the current IP will lose and
user should find the new IP on the DHCP server.
Table 4-3 Descriptions of the IP Configuration Web Page Screen Objects
- 19 -