TA Triumph-Adler DC 2325 - Manual (Page 75)

Preparation before Use
OPERATION GUIDE 2-41
2
IMPORTANT: How to load envelopes (orientation and facing) will differ
depending on the type of envelope. Be sure to load it in correctly, otherwise
printing may be done in the wrong direction or on the wrong face.
NOTE: When you load envelopes in the Multi Purpose Tray, select the
envelope type by referring to Specifying Paper Size and Media Type for
the Multi Purpose Tray on page 2-44.
Specifying Paper Size and Media
The default paper size setting for cassettes 1 and 2, for Multi Purpose tray
and for the optional paper feeder (cassettes 3 and 4) is [Auto Detection],
and the default media type setting is [Plain].
To fix the type of paper to be used in cassettes, specify the paper size and
media type setting. (Refer to Specifying Paper Size and Media Type for the
Cassettes on page 2-41.)
To fix the type of paper to be used in Multi Purpose tray, specify the paper
size setting. (Refer to Specifying Paper Size and Media Type for the Multi
Purpose Tray on page 2-44.)
Specifying Paper Size and Media Type for the Cassettes
To fix the type of paper to be used in cassettes 1 or 2 or the optional paper
feeder (cassettes 3 and 4), specify the paper size. Also, you use a media
type other than plain paper, specify the media type setting.
Selection Item Selectable Size/Type
Paper Size Auto Paper size is automatically detected and
selected. Select whether the paper is in
Metric size or in Inch size.
Standard
Sizes 1 Select from the standard sizes. Selectable
paper sizes are as follows.
Inch size: Ledger, Letter-R, Letter, Legal,
Statement-R, 8.5×13.5" and Oficio II
Metric size: A3, B4, A4, A4-R, B5, B5-R,
A5-R, and Folio
Standard
Sizes 2 Select from the standard sizes not included
in Standard Sizes 1. Selectable paper sizes
are as follows.
Inch size: A3, B4, A4, A4-R, B5, B5-R, A5-
R, and Folio, 8K, 16K-R and 16K
Metric size: Ledger, Letter-R, Letter, Legal,
Statement-R, 8.5×13.5" and Oficio II, 8K,
16K-R and 16K