TA Triumph-Adler DC 2325 User Manual
Page 190
Troubleshooting
6-10
OPERATION GUIDE
Send error.
Job is canceled. Press
[End].
####
–
2204: The E-mail size exceeds the
acceptable send data capacity.
Decrease the size or resolution of the
scanned data to be transmitted and
resend the E-mail.
5101, 5102, 5103, 5104, 7102, 720f:
Turn the main power switch off and
back on. If this error occurs several
times, make a note of the displayed
error code and contact your service
representative.(Refer to the
corrective action for the error
message “ An error has occurred.”)
9181: The scanned original exceeds
the acceptable number of pages of
999. Send the excess pages
separately.
—
—
—
Set the waste toner
box.
–
The waste toner box is not installed
correctly. Set it correctly.
Staple error.
–
If a staple error occurs, the machine
will stop and the corrective action will
be indicated on the touch panel.
Leave the machine on and follow the
instruction to take an appropriate
action.
—
Staple jam.
–
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
staple.
The ID is not
registered.
–
The Account ID does not match.
Check the registered Account ID.
—
The memory card is
not formatted.
Is the memory card
formatted?
Format the memory card.
—
The phone receiver is
off the hook.
–
Put down the receiver.
—
The removable
memory is not
formatted.
Is the removable memory
formatted by this machine?
Use the removable memory
formatted by this machine.
—
The source file is not
found.
–
The specified file is not found. The
job is canceled. Press [End].
—
Error Message
Checkpoints
Corrective Actions
Reference
Page