TA Triumph-Adler DC 2325 - Manual (Page 23)

OPERATION GUIDE xxi
Energy Saving Control Function
The device comes equipped with a Low Power Mode where energy
consumption is reduced after a certain amount of time elapses since the
device was last used, as well as a Sleep Mode where printer and fax
functions remain in a waiting state but power consumption is still reduced
to a minimum when there is no activity with the device within a set amount
of time.
Low Power Mode
The device automatically enters Low Power Mode when 9 minutes have
passed since the device was last used. The amount of time of no activity
that must pass before Low Power Mode is activated may be lengthened.
For more information refer to Low Power Mode and Auto Low Power
Mode on page 3-4.
Sleep
The device automatically enters Sleep when 29 minutes have passed
since the device was last used. The amount of time of no activity that must
pass before Sleep is activated may be lengthened. For more information
see Sleep and Auto Sleep on page 3-5.
Automatic 2-Sided Copy Function
This device includes 2-sided copying as a standard function. For example,
by copying two 1-sided originals onto a single sheet of paper as a 2-sided
copy, it is possible to lower the amount of paper used. For more
information see Duplex Copying on page 3-16.
Paper Recycling
This device supports the recycled paper which reduces the load on the
environment. Your sales or service representative can provide information
about recommended paper types.
Energy Star (ENERGY STAR
®
) Program
We have determined as a participating company in the International
Energy Star Program that this product is compliant with the standards laid
out in the International Energy Star Program.