TA Triumph-Adler DC 2325 - Manual (Page 120)

Basic Operation
3-34 OPERATION GUIDE
Data to be entered are as follows.
6 Upon completion of
all entries, press
[Connection Test] to
check the
connection.
NOTE: Connected. appears when connection to the destination is
correctly established. If Cannot connect. appears, review the entry.
If you wish to specify another destination, go to the step 7. If the destination
is only one, go to step 8.
7 Press [Next Dest.] and repeat steps 4 to 6 to specify the destination. Up to
10 folders (total number of SMB and FTP folders) can be specified.
NOTE: When [Add to Addr Book] is displayed, the entry is registered in
the Address Book.
8 Press [OK] to register the entry in the destination list.
9 Check the destination list.
Select a destination and press [Detail/Edit] to check and edit it. Edit it, if
necessary, referring to steps 4 to 6.
Item Data to be entered
Max.
characters
Host
Name*
* To specify a port number different from the default (21), enter using
the format “host name : port number” (e.g., FTPhostname:140).
Host name or IP address of FTP server Up to 62
characters
Path Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the
home directory. Up to 126
characters
Login
User
Name FTP server log-in user name Up to 62
characters
Login
Password FTP server log-in password Up to 62
characters
Status 10/10/2007 10:10
Place original .
Ready to send. Destination
Cancel OK Next Dest. Add to Addr Book
Connection
Test
Host Name
Path
Login
User Name
Login
Password
SMB
FTP
Folder Path Entry
Executing TX job **.
1