Rose Electronics Orion X-series - Manual (Page 85)

Orion X Installation and Operations Manual 77
Addressing of Main and Sub Matrices
The Orion X can be cascaded to two levels. Commands (including opening the OSD) can be optionally sent
to the main or the sub matrix.
When command mode is activate, select if the commands should be handled in the main matrix or
to indicate the commands should be handled in the sub matrix.
OSD Access
4. Display the OSD of the main matrix:
, , (optional),
5. Display the OSD of the sub matrix:
, , ,
Example: Switching to CPU port 23 of the sub matrix.
1. Switch to the CPU Port on the master matrix where the sub matrix is connected (e.g. 12):
, , (optional), <1>, <2>,
2. Then switch to CPU Port 23 on the sub matrix:
, , , <2>, <3>,
Note: The selected main matrix / sub matrix mode will remain activated until the other mode is manually
activated. This means that if is currently selected for example, all subsequent commands will be sent
to the slave, as long as Command Mode remains active.