Rose Electronics Orion X-series - Manual (Page 75)

Orion X Installation and Operations Manual 67
To save the configuration into to an external configuration file, proceed as follows:
1. Select File > Save As in the menu bar.
2. Enter a name for the configuration.
3. Select the directory of the configuration on the storage medium where it has to be saved.
Configurations are always saved in a file with the ending “dtc”.
Loading of Configurations (external)
Externally saved configurations are opened, uploaded, and activated in this menu. This menu can only be
accessed in the Java Tool.
Figure 56.Loading external configuration through the Java Tool
To load an external configuration file, proceed as follows:
1. Select File > Open… during offline-mode and select the storage location of the configuration file
that has to be opened.
2. Open the configuration by pressing the Open button.
3. Select File > Upload in the menu bar to transfer the opened configuration to the matrix. Enter the
necessary parameters.
4. Select Matrix > Connect in the menu bar to make a connection between the matrix and the Java
tool. Enter the necessary parameters.
5. Select Administration > Activate Configuration and select the configuration that has to be
activated.
6. Confirm the process with the Activate button.
The opened configuration is activated now and can be used.