Rose Electronics Orion X-series - Manual (Page 52)

44 Orion X Installation and Operations Manual
Setting up User Macros through the OSD
 Select via Configuration > User Macros in the main menu the user for which a user macro has to be
created.
Figure 35. Setting up User Macros through OSD
To create a macro for the selected user, proceed as follows:
1. Select in the Key field that one (1-16) for which a macro has to be created.
2. Select the respective place on the list (1-16) of the key that has to be set with a macro key.
3. Select for the marked place on the list a macro command in the Macro Data field.
4. Set the necessary parameters P1 and P2 (e.g. CON Devices or CPU Devices) for the selected
macro command.
5. Confirm the inputs by pressing the key and repeat the process for further macro
commands, if necessary.