Rose Electronics Orion X-series - Manual (Page 58)

50 Orion X Installation and Operations Manual
Modifying CPU Settings through the Java Tool
 Select Definition > CPU Devices in the task area.
Figure 40. Modifying CPU Settings through the Java Tool
Select between the following buttons:
Button
Function
New Open a new CPU Device
Delete Delete a CPU Device
Apply Confirm a created CPU Device
Cancel Reject changes
> Assign selected extender units
>> Assign all available extender units
< Remove the selected extender units
<< Remove all extender units
Select between the following keyboard commands:
Function
Keyboard Command
Change assignment number of the EXT unit upwards <+>
Change assignment number of the EXT unit downwards <->
To create a new CPU device, proceed as follows:
1. Press the New button.
2. Select whether a real CPU (Create a real CPU) or a virtual CPU (Create a virtual CPU) is to be
created, or if a template of an existing CPU should be used (Choose template).
Note: A template can only be used, if there is at least one existing CPU device.
3. Press the OK button.
4. Determine all parameters that are relevant for the CPU.
5. To confirm the new CPU, press the Apply button.